- Chemical Analysis: Wet Chemical Analysis, Atomic Absorption Spectrometry and Optical Emission Spectrometry to determine composition in Metals and Alloys.
- Corrosion Testing: Slat Spray, CASS, Coating Thickness, and Corrosion Analysis Studies on materials.
- Calibration Services: NIST Traceable Calibration of Torque Wrenches, Torque-Tension Devices and Pressure Gauges.
- Failure Analysis: Metallurgical Investigations, Microscopic and Macroscopic Analysis, Fractography, Fitness for Service and Residual Life Expectancy Studies.
- Field Inspection Services: Inspection of Welded Pipelines, Piping, Pressure Vessels, Structures and other Weldments by qualified Inspectors (AWS CWI or ASNT VT II). Welder Qualification Test Witness by AWS-approved Test Supervisor (CWI). Inspection of New and Installed Equipment by experienced engineers and technicians for verifying compliance to Specifications/Standards.
- Non-Destructive Testing(NDT): Inspection and Testing utilizing one or more of the following as NDT methods - Radiography Testing (RT), Ultrasonic Testing (UT), Magnetic Particle Testing (MT), Penetrant Testing (PT), Visual Testing (VT), Electromagnetic Testing (ET), Acoustic Emission Testing (AET), Leak Testing (LT), Infra Red Thermography (IRT), Vibration Testing (VR) and Ground Penetrating Radar (GPR).
- Mechanical Testing: Tensile, Bend, Flexure, Impact, Fatigue, Torsion and other Mechanical Tests on Ferrous, Non-Ferrous, Ceramic, Plastic, Rubber and Composite Materials.
- Ground Penetrating Radar (GPR): Ground-penetrating radar (GPR) is a geophysical method that uses radar pulses to image the subsurface. This non-destructive method uses electromagnetic radiation in the microwave band (UHF/VHF frequencies) of the radio spectrum, and detects the reflected signals from subsurface structures
- Products Testing: Testing of Product Components and Assemblies to verify compliance to stated requirements. Dimensional Verification (Metrology) of Components and Assemblies utilizing instruments and gauges with NIST Traceable Calibrations.
- Training: Most Construction Codes require certified NDT Level II Inspectors as per SNT-TC-1A to perform non-destructive testing.
- Welding Engineering: Consultancy for WPS Preparation, In-house/ Field Inspection Services for Witness (by CWI) of PQR and WPQR Coupons, and Welding for Weldability Testing.
Inspection & Testing
Services, Inc.
1601 Lower Rd
Linden, NJ 07036
Ph: 908-862-4800,
Fax: 908-862-4825
E-mail:
its@inspecttest.com
Services, Inc.
1601 Lower Rd
Linden, NJ 07036
Ph: 908-862-4800,
Fax: 908-862-4825
E-mail:
its@inspecttest.com
